cdi-devel by Thread
- [cdi-devel] [PATCH] ext2: Check for null pointer before using it,
Pascal Störzbach
- [cdi-devel] [PATCH 0/2] ext2: Duplicate filename fixes,
Kevin Wolf
- [cdi-devel] [PATCH 0/5] e1000: Support qemu e1000e emulation,
Kevin Wolf
- [cdi-devel] [PATCH 0/9] hdaudio: Patches for real hardware,
Kevin Wolf
- [cdi-devel] [PATCH 1/9] hdaudio: Fix use of wrong loop counter,
Kevin Wolf
- [cdi-devel] [PATCH 2/9] hdaudio: Skip non-audio function groups,
Kevin Wolf
- [cdi-devel] [PATCH 3/9] hdaudio: Extract widget_init(),
Kevin Wolf
- [cdi-devel] [PATCH 4/9] hdaudio: Debug output for every widget,
Kevin Wolf
- [cdi-devel] [PATCH 5/9] hdaudio: Enable output pins,
Kevin Wolf
- [cdi-devel] [PATCH 6/9] hdaudio: Fix hda_set_volume() scaling,
Kevin Wolf
- [cdi-devel] [PATCH 7/9] hdaudio: Power up audio function and all widgets,
Kevin Wolf
- [cdi-devel] [PATCH 8/9] hdaudio: Set EAPD bit for all widgets,
Kevin Wolf
- [cdi-devel] [PATCH 9/9] hdaudio: Set the right format for the output stream,
Kevin Wolf
- Re: [cdi-devel] [PATCH 0/9] hdaudio: Patches for real hardware,
Kevin Wolf
- [cdi-devel] [PATCH 0/7] e1000: Support the NIC in the T500,
Kevin Wolf
- [cdi-devel] [PATCH 0/5] usb: HID,
Max Reitz
- [cdi-devel] [PATCH 00/10] usb: Some fixes,
Max Reitz
- [cdi-devel] [PATCH 01/10] usb: extern "C" {},
Max Reitz
- [cdi-devel] [PATCH 02/10] usb: Add necessary recovery intervals,
Max Reitz
- [cdi-devel] [PATCH 03/10] usb: Ignore hub power switching errors,
Max Reitz
- [cdi-devel] [PATCH 04/10] usb: Make descriptors inherit from a common base,
Max Reitz
- [cdi-devel] [PATCH 05/10] usb: Store hub and hub_port for each usb_device,
Max Reitz
- [cdi-devel] [PATCH 06/10] usb: Create provide_virtual_devices(),
Max Reitz
- [cdi-devel] [PATCH 07/10] usb: Fix and simplify debugging code,
Max Reitz
- [cdi-devel] [PATCH 08/10] usb: Clear ENDPOINT_HALT on stalling bulk transfer,
Max Reitz
- [cdi-devel] [PATCH 09/10] usb-storage: Drop bulk_only_reset()'s return value,
Max Reitz
- [cdi-devel] [PATCH 10/10] ehci: Use __attribute__((aligned())),
Max Reitz
- Re: [cdi-devel] [PATCH 00/10] usb: Some fixes,
Kevin Wolf
- [cdi-devel] [PATCH] ata: Initialize ata_device to 0,
Max Reitz
- [cdi-devel] [PATCH 06/11] iso9660: Implement .fs_probe,
Kevin Wolf
- [cdi-devel] [PATCH 05/11] ext2: Implement .fs_probe,
Kevin Wolf
- [cdi-devel] [PATCH 04/11] cdi/fs: Add .fs_probe callback,
Kevin Wolf
- [cdi-devel] [PATCH] ata: Temporary buffer for ATAPI commands,
Max Reitz
- [cdi-devel] [PATCH v4 0/4] USB support,
Max Reitz
- [cdi-devel] [PATCH v3 00/10] USB support,
Max Reitz
- [cdi-devel] [PATCH v3 01/10] Makefile: Heed Makefile.conf,
Max Reitz
- [cdi-devel] [PATCH v3 02/10] cdi/misc: Add CDI_UPCAST and endianness functions,
Max Reitz
- [cdi-devel] [PATCH v3 03/10] cdi/misc: Add cdi_elapsed_ms(),
Max Reitz
- [cdi-devel] [PATCH v3 04/10] cdi/scsi, cdi.h: Remove týndur-specific fields,
Max Reitz
- [cdi-devel] [PATCH v3 05/10] cdi/scsi: Add support for multiple LUNs,
Max Reitz
- [cdi-devel] [PATCH v3 06/10] cdi.h: Add cdi_handle_bus_device(),
Max Reitz
- [cdi-devel] [PATCH v3 07/10] cdi/usb: Add headers,
Max Reitz
- [cdi-devel] [PATCH v3 08/10] ehci: Add EHCI driver,
Max Reitz
- [cdi-devel] [PATCH v3 09/10] usb: Add USB 2.0 bus driver,
Max Reitz
- [cdi-devel] [PATCH v3 10/10] usb-storage: Add USB mass storage driver,
Max Reitz
- [cdi-devel] [PATCH v2 0/9] USB support,
Max Reitz
- [cdi-devel] [PATCH v2 1/9] Makefile: Heed Makefile.conf,
Max Reitz
- [cdi-devel] [PATCH v2 2/9] cdi/misc: Add CDI_UPCAST and endianness functions,
Max Reitz
- [cdi-devel] [PATCH v2 3/9] cdi/scsi, cdi.h: Remove týndur-specific fields,
Max Reitz
- [cdi-devel] [PATCH v2 4/9] cdi/scsi: Add support for multiple LUNs,
Max Reitz
- [cdi-devel] [PATCH v2 5/9] cdi.h: Add cdi_handle_bus_device(),
Max Reitz
- [cdi-devel] [PATCH v2 6/9] cdi/usb: Add headers,
Max Reitz
- [cdi-devel] [PATCH v2 7/9] ehci: Add EHCI driver,
Max Reitz
- [cdi-devel] [PATCH v2 8/9] usb: Add USB 2.0 bus driver,
Max Reitz
- [cdi-devel] [PATCH v2 9/9] usb-storage: Add USB mass storage driver,
Max Reitz
- [cdi-devel] [PATCH v2] ahci: Initialisation/Reset improvements,
Kevin Wolf
- [cdi-devel] [PATCH] ahci: Initialisation/Reset improvements,
Kevin Wolf
- [cdi-devel] [PATCH] rtl8168b: Add driver,
Max Reitz
- [cdi-devel] [PATCH 0/8] USB support,
Max Reitz
- [cdi-devel] [PATCH 1/8] cdi/misc: Add CDI_UPCAST and endianness functions,
Max Reitz
- [cdi-devel] [PATCH 2/8] cdi/scsi, cdi.h: Remove týndur-specific fields,
Max Reitz
- [cdi-devel] [PATCH 3/8] cdi/scsi: Add LUN count to cdi_scsi_device,
Max Reitz
- [cdi-devel] [PATCH 4/8] cdi.h: Add cdi_handle_bus_device(),
Max Reitz
- [cdi-devel] [PATCH 5/8] cdi/usb: Add headers,
Max Reitz
- [cdi-devel] [PATCH 6/8] ehci: Add EHCI driver,
Max Reitz
- [cdi-devel] [PATCH 7/8] usb: Add USB 2.0 bus driver,
Max Reitz
- [cdi-devel] [PATCH 8/8] usb-storage: Add USB mass storage driver,
Max Reitz
- Re: [cdi-devel] [PATCH 0/8] USB support,
Max Reitz
- [cdi-devel] [PATCH] Memoryleak in ISO9660 driver,
Gurgel100
- [cdi-devel] [PATCH 0/4] cdi: Schnelleres CD-ROM und Fixes,
Kevin Wolf
- [cdi-devel] [PATCH] floppy: Fix step_rate_time for SPECIFY,
Kevin Wolf
- [cdi-devel] [PATCH] iso9660: Fix resource flags,
Kevin Wolf
- [cdi-devel] [PATCH v2 0/5] AHCI driver,
Kevin Wolf
- [cdi-devel] [PATCH 0/3] AHCI driver,
Kevin Wolf
- [cdi-devel] [PATCH] libext2: Don't destroy boot loader,
Kevin Wolf
- [cdi-devel] [PATCH] floppy: Fix initialisation,
Kevin Wolf
- [cdi-devel] [PATCH 0/2] Fixes for ata,
Kevin Wolf
- [cdi-devel] [PATCH] e1000: fix RX/TX descriptor alignment.,
Matthew Iselin
- [cdi-devel] [PATCH] e1000: Fix receive buffer size,
Kevin Wolf
- [cdi-devel] [PATCH 0/2] CDI.audio,
max
- [cdi-devel] [PATCH] ata: Fix bus master direction flag,
Kevin Wolf
- [cdi-devel] [RFC] CDI.audio: ac97,
max
- [cdi-devel] [PATCH] cdi/cmos.h,
max
- [cdi-devel] [RFC][PATCH v2] fat: Beginnings of a FAT file system driver,
Kevin Wolf
- [cdi-devel] [PATCH] doc: Add text to doxygen main page,
Kevin Wolf
- [cdi-devel] [PATCH] e1000: Add 8086:1004 PCI ID,
Kevin Wolf
- [cdi-devel] [PATCH] Improve documentation for cdi/storage,
Kevin Wolf
- [cdi-devel] [RFC][PATCH] fat: Beginnings of a FAT file system driver,
Kevin Wolf
- [cdi-devel] [PATCH] pci.h: Improve documentation,
Kevin Wolf
- [cdi-devel] [PATCH] Header cleanups,
Kevin Wolf
- [cdi-devel] [PATCH v2] CDI.usb,
max
- [cdi-devel] [PATCH] CDI.usb,
max
- [cdi-devel] [PATCH] doc.h: English translation,
Kevin Wolf
- [cdi-devel] [RFC] Getting the physical address of a virtual buffer,
Max Reitz
- [cdi-devel] [PATCH] Make e1000 work in VirtualBox,
Matthew Iselin
- Message not available
[cdi-devel] [PATCH v2] Add cdi_provide_device prototype to cdi.h,
Matthew Iselin
[cdi-devel] [PATCH] Add cdi_provide_device prototype to cdi.h,
Matthew Iselin
[cdi-devel] [PATCH] Change CDI headers to use angle brackets for other CDI headers,
Matthew Iselin
[cdi-devel] [PATCH] Change cdi.h to use angle brackets for cdi-osdep.h include,
Matthew Iselin
[cdi-devel] [PATCH 0/4] mem.h - Part 1,
Kevin Wolf
[cdi-devel] [PATCH v2] mem.h: Handling memory areas,
Kevin Wolf
[cdi-devel] CDI status,
Kevin Wolf
Re: [cdi-devel] [RFC PATCH] mem.h: Handling memory areas [edit: documentation],
Matthew Iselin
[cdi-devel] [RFC PATCH] mem.h: Handling memory areas,
Kevin Wolf
[cdi-devel] [PATCH] Documentation: Add general interface description (German),
Kevin Wolf
[cdi-devel] [PATCH] misc.h: Improved documentation of cdi_wait_irq,
Kevin Wolf
[cdi-devel] [PATCH] ata: Remove partition handling,
Kevin Wolf
[cdi-devel] Interrupts,
Kevin Wolf
[cdi-devel] [PATCH] Add English translations to cdi/lists.h,
Rich Edelman
[cdi-devel] [PATCH 0/5] Forward ported USB patches,
Kevin Wolf
[cdi-devel] Proposed Dynamic Driver Loading System,
Matthew Iselin
[cdi-devel] [PATCH] Documentation: Document and translate cdi.h,
Kevin Wolf
[cdi-devel] [PATCH] cdi.h: Remove cdi_run_drivers from the interface,
Kevin Wolf
[cdi-devel] [PATCH] cdi: Move send_packet into cdi_net_driver,
Kevin Wolf
[cdi-devel] [PATCH 0/3] Rework device creation mechanism,
Kevin Wolf
[cdi-devel] [PATCH] cdi.h: Remove cdi_device.type,
Kevin Wolf
[cdi-devel] [PATCH v3 0/5] USB support,
Kevin Wolf
[cdi-devel] [PATCH v2] Direct access to PCI configuration space,
max
[cdi-devel] [PATCH] Fix a signed/unsigned comparison warning in e1000,
Matthew Iselin
[cdi-devel] [PATCH] Direct access to PCI configuration space,
max
[cdi-devel] [PATCH] Makefile,
max
[cdi-devel] [PATCH] English comments for usb.h and usb-hcd.h,
max
[cdi-devel] [PATCH] Memleak in USB 1.1,
max
[cdi-devel] [PATCH] Remove dependency on cdi-osdep.h in cdi.h,
Matthew Iselin
[cdi-devel] [PATCH] Update cdi-osdep.h to contain OS-specific structs for PCI and DMA,
Matthew Iselin
[cdi-devel] [PATCH v2] Various cleanups and portability fixes,
Matthew Iselin
[cdi-devel] [PATCH] USB mass storage device driver,
max
[cdi-devel] [PATCH] OHCI,
max
[cdi-devel] [PATCH] UHCI,
max
[cdi-devel] [PATCH] USB 1.1,
max
[cdi-devel] [PATCH] CDI.usb, mempool,
max
[cdi-devel] [PATCH] Various cleanups and portability fixes,
Matthew Iselin
[cdi-devel] [PATCH v2] CDI.usb, CDI.usb-hcd,
max
[cdi-devel] [PATCH] CDI.usb, CDI.usb-hcd,
max
[cdi-devel] [PATCH 0/4] Restructure driver initialization,
Kevin Wolf
[cdi-devel] [PATCH] Oncoming CDI drivers' numbers,
max
[cdi-devel] Proposed Sound Infrastructure,
Matthew Iselin
[cdi-devel] [PATCH v2] Fix warnings in e1000, sis900, pcnet,
Matthew Iselin
[cdi-devel] [PATCH] Fix warnings in e1000, pcnet, sis900,
Matthew Iselin
[cdi-devel] [PATCH] Update pcnet to use cdi_wait_irq,
Matthew Iselin
[cdi-devel] [PATCH] CDI.audio - without "#define TYNDUR",
max
[cdi-devel] [PATCH] CDI.audio,
max
- <Possible follow-ups>
- [cdi-devel] [PATCH] CDI.audio,
max
- Re: [cdi-devel] [PATCH] CDI.audio,
Kevin Wolf
- Re: [cdi-devel] [PATCH] CDI.audio,
Matthew Iselin
- Re: [cdi-devel] [PATCH] CDI.audio,
Kevin Wolf
- Re: [cdi-devel] [PATCH] CDI.audio,
Max Reitz
- Re: [cdi-devel] [PATCH] CDI.audio,
Max Reitz
- Re: [cdi-devel] [PATCH] CDI.audio,
Kevin Wolf
- Re: [cdi-devel] [PATCH] CDI.audio,
Max Reitz
- Re: [cdi-devel] [PATCH] CDI.audio,
Matthew Iselin
- Re: [cdi-devel] [PATCH] CDI.audio,
Max Reitz
- Re: [cdi-devel] [PATCH] CDI.audio,
Kevin Wolf
- Re: [cdi-devel] [PATCH] CDI.audio,
Max Reitz
- Re: [cdi-devel] [PATCH] CDI.audio,
Kevin Wolf
[cdi-devel] [PATCH] ac97: CDI.storage driver,
max
[cdi-devel] Multilinguales Hello World [1],
Kevin Wolf
[cdi-devel] [PATCH] Mehrere ISRs pro IRQ,
max
[cdi-devel] [PATCH] usb: A bit faster,
max
[cdi-devel] [PATCH] Multiple packets,
max
[cdi-devel] [PATCH] usb: Handle multiple packets in usb_do_packet,
Kevin Wolf
[cdi-devel] [PATCH] usb: OHCI driver,
max
[cdi-devel] [PATCH] Introduced pipes, less parameters, OHCI beginning,
max
[cdi-devel] [PATCH] usb: Quarter of memory,
max
[cdi-devel] [PATCH 2/2] [usb] No memory error, remove STALL,
max
[cdi-devel] [PATCH] Double reset on enum, no toggle change on error,
max
[cdi-devel] [PATCH] Correct DATA0/DATA1 treatment and packet size,
max
[cdi-devel] [PATCH] No STALL,
max
[cdi-devel] [PATCH] usb: uhci_do_packet interface rework,
Kevin Wolf
[cdi-devel] [PATCH] Reformatting of the reformatting,
Max Reitz
[cdi-devel] [PATCH] "Better" indent, wait for ACK instead of sleep,
max
[cdi-devel] [PATCH] usb: struct usb_packet,
Kevin Wolf
[cdi-devel] [PATCH 0/2] Compiling CDI on Linux,
Kevin Wolf
[Cdi-devel] [PATCH] UHCI, USB, MSC,
Max Reitz
Mail converted by MHonArc