cdi-devel by Date

• Thread Index

• Re: [cdi-devel] [PATCH] ext2: Check for null pointer before using it
  • From: Kevin Wolf
• [cdi-devel] [PATCH] ext2: Check for null pointer before using it
  • From: Pascal Störzbach
• [cdi-devel] [PATCH 2/2] ext2: Prevent creating second dir entry with same name
  • From: Kevin Wolf
• [cdi-devel] [PATCH 1/2] ext2: Handle duplicate dir entries gracefully in unlink
  • From: Kevin Wolf
• [cdi-devel] [PATCH 0/2] ext2: Duplicate filename fixes
  • From: Kevin Wolf
• Re: [cdi-devel] [PATCH 0/5] e1000: Support qemu e1000e emulation
  • From: Kevin Wolf
• [cdi-devel] [PATCH 5/5] e1000: Add model for qemu e1000e emulation
  • From: Kevin Wolf
• [cdi-devel] [PATCH 4/5] e1000: Acknowledge interrupts explicitly by ICR write
  • From: Kevin Wolf
• [cdi-devel] [PATCH 3/5] e1000: Initialise status field in Rx Descriptors
  • From: Kevin Wolf
• [cdi-devel] [PATCH 2/5] e1000: Improve debugging code
  • From: Kevin Wolf
• [cdi-devel] [PATCH 1/5] e1000: Fix EERD reading for e1000e
  • From: Kevin Wolf
• [cdi-devel] [PATCH 0/5] e1000: Support qemu e1000e emulation
  • From: Kevin Wolf
• Re: [cdi-devel] [PATCH 0/9] hdaudio: Patches for real hardware
  • From: Kevin Wolf
• Re: [cdi-devel] [PATCH 0/7] e1000: Support the NIC in the T500
  • From: Kevin Wolf
• Re: [cdi-devel] [PATCH 1/5] usb: Extend interface for interrupt transfers
  • From: Kevin Wolf
• Re: [cdi-devel] [PATCH 3/5] usb: Implement interrupt transfers
  • From: Kevin Wolf
• Re: [cdi-devel] [PATCH 5/5] usb-hid: Add driver
  • From: Kevin Wolf
• Re: [cdi-devel] [PATCH 4/5] hid: Specify interface
  • From: Kevin Wolf
• Re: [cdi-devel] [PATCH 2/5] ehci: Implement interrupt transfers
  • From: Kevin Wolf
• [cdi-devel] [PATCH 9/9] hdaudio: Set the right format for the output stream
  • From: Kevin Wolf
• [cdi-devel] [PATCH 8/9] hdaudio: Set EAPD bit for all widgets
  • From: Kevin Wolf
• [cdi-devel] [PATCH 7/9] hdaudio: Power up audio function and all widgets
  • From: Kevin Wolf
• [cdi-devel] [PATCH 6/9] hdaudio: Fix hda_set_volume() scaling
  • From: Kevin Wolf
• [cdi-devel] [PATCH 5/9] hdaudio: Enable output pins
  • From: Kevin Wolf
• [cdi-devel] [PATCH 4/9] hdaudio: Debug output for every widget
  • From: Kevin Wolf
• [cdi-devel] [PATCH 3/9] hdaudio: Extract widget_init()
  • From: Kevin Wolf
• [cdi-devel] [PATCH 2/9] hdaudio: Skip non-audio function groups
  • From: Kevin Wolf
• [cdi-devel] [PATCH 1/9] hdaudio: Fix use of wrong loop counter
  • From: Kevin Wolf
• [cdi-devel] [PATCH 0/9] hdaudio: Patches for real hardware
  • From: Kevin Wolf
• [cdi-devel] [PATCH 7/7] e1000: Wait for Link Up
  • From: Kevin Wolf
• [cdi-devel] [PATCH 6/7] e1000: Implement support for 8086:10f5 e1000e chip
  • From: Kevin Wolf
• [cdi-devel] [PATCH 5/7] e1000: Move a few model-specific things to e1000_model
  • From: Kevin Wolf
• [cdi-devel] [PATCH 4/7] e1000: Introduce e1000_model
  • From: Kevin Wolf
• [cdi-devel] [PATCH 3/7] e1000: Fix error path for full TX queue
  • From: Kevin Wolf
• [cdi-devel] [PATCH 2/7] e1000: Make descriptors volatile
  • From: Kevin Wolf
• [cdi-devel] [PATCH 1/7] e1000: Fix TCTL Pad Short Packets bit
  • From: Kevin Wolf
• [cdi-devel] [PATCH 0/7] e1000: Support the NIC in the T500
  • From: Kevin Wolf
• Re: [cdi-devel] [PATCH 00/10] usb: Some fixes
  • From: Kevin Wolf
• [cdi-devel] [PATCH 5/5] usb-hid: Add driver
  • From: Max Reitz
• [cdi-devel] [PATCH 4/5] hid: Specify interface
  • From: Max Reitz
• [cdi-devel] [PATCH 3/5] usb: Implement interrupt transfers
  • From: Max Reitz
• [cdi-devel] [PATCH 2/5] ehci: Implement interrupt transfers
  • From: Max Reitz
• [cdi-devel] [PATCH 1/5] usb: Extend interface for interrupt transfers
  • From: Max Reitz
• [cdi-devel] [PATCH 0/5] usb: HID
  • From: Max Reitz
• [cdi-devel] [PATCH 10/10] ehci: Use __attribute__((aligned()))
  • From: Max Reitz
• [cdi-devel] [PATCH 09/10] usb-storage: Drop bulk_only_reset()'s return value
  • From: Max Reitz
• [cdi-devel] [PATCH 08/10] usb: Clear ENDPOINT_HALT on stalling bulk transfer
  • From: Max Reitz
• [cdi-devel] [PATCH 07/10] usb: Fix and simplify debugging code
  • From: Max Reitz
• [cdi-devel] [PATCH 06/10] usb: Create provide_virtual_devices()
  • From: Max Reitz
• [cdi-devel] [PATCH 05/10] usb: Store hub and hub_port for each usb_device
  • From: Max Reitz
• [cdi-devel] [PATCH 04/10] usb: Make descriptors inherit from a common base
  • From: Max Reitz
• [cdi-devel] [PATCH 03/10] usb: Ignore hub power switching errors
  • From: Max Reitz
• [cdi-devel] [PATCH 02/10] usb: Add necessary recovery intervals
  • From: Max Reitz
• [cdi-devel] [PATCH 01/10] usb: extern "C" {}
  • From: Max Reitz
• [cdi-devel] [PATCH 00/10] usb: Some fixes
  • From: Max Reitz
• Re: [cdi-devel] [PATCH] ata: Temporary buffer for ATAPI commands
  • From: Kevin Wolf
• Re: [cdi-devel] [PATCH] ata: Initialize ata_device to 0
  • From: Kevin Wolf
• Re: [cdi-devel] [PATCH v4 4/4] usb-storage: Add USB mass storage driver
  • From: Kevin Wolf
• [cdi-devel] [PATCH] ata: Initialize ata_device to 0
  • From: Max Reitz
• [cdi-devel] [PATCH 06/11] iso9660: Implement .fs_probe
  • From: Kevin Wolf
• [cdi-devel] [PATCH 05/11] ext2: Implement .fs_probe
  • From: Kevin Wolf
• [cdi-devel] [PATCH 04/11] cdi/fs: Add .fs_probe callback
  • From: Kevin Wolf
• [cdi-devel] [PATCH] ata: Temporary buffer for ATAPI commands
  • From: Max Reitz
• [cdi-devel] [PATCH v4 4/4] usb-storage: Add USB mass storage driver
  • From: Max Reitz
• [cdi-devel] [PATCH v4 3/4] usb: Add USB 2.0 bus driver
  • From: Max Reitz
• [cdi-devel] [PATCH v4 2/4] ehci: Add EHCI driver
  • From: Max Reitz
• [cdi-devel] [PATCH v4 1/4] cdi/usb: Add headers
  • From: Max Reitz
• [cdi-devel] [PATCH v4 0/4] USB support
  • From: Max Reitz
• Re: [cdi-devel] [PATCH v3 08/10] ehci: Add EHCI driver
  • From: Max Reitz
• Re: [cdi-devel] [PATCH] rtl8168b: Add driver
  • From: Kevin Wolf
• Re: [cdi-devel] [PATCH v3 10/10] usb-storage: Add USB mass storage driver
  • From: Kevin Wolf
• Re: [cdi-devel] [PATCH v3 09/10] usb: Add USB 2.0 bus driver
  • From: Kevin Wolf
• Re: [cdi-devel] [PATCH v3 08/10] ehci: Add EHCI driver
  • From: Kevin Wolf
• [cdi-devel] [PATCH v3 10/10] usb-storage: Add USB mass storage driver
  • From: Max Reitz
• [cdi-devel] [PATCH v3 09/10] usb: Add USB 2.0 bus driver
  • From: Max Reitz
• [cdi-devel] [PATCH v3 08/10] ehci: Add EHCI driver
  • From: Max Reitz
• [cdi-devel] [PATCH v3 07/10] cdi/usb: Add headers
  • From: Max Reitz
• [cdi-devel] [PATCH v3 06/10] cdi.h: Add cdi_handle_bus_device()
  • From: Max Reitz
• [cdi-devel] [PATCH v3 05/10] cdi/scsi: Add support for multiple LUNs
  • From: Max Reitz
• [cdi-devel] [PATCH v3 04/10] cdi/scsi, cdi.h: Remove týndur-specific fields
  • From: Max Reitz
• [cdi-devel] [PATCH v3 03/10] cdi/misc: Add cdi_elapsed_ms()
  • From: Max Reitz
• [cdi-devel] [PATCH v3 02/10] cdi/misc: Add CDI_UPCAST and endianness functions
  • From: Max Reitz
• [cdi-devel] [PATCH v3 01/10] Makefile: Heed Makefile.conf
  • From: Max Reitz
• [cdi-devel] [PATCH v3 00/10] USB support
  • From: Max Reitz
• Re: [cdi-devel] [PATCH v2 7/9] ehci: Add EHCI driver
  • From: Max Reitz
• Re: [cdi-devel] [PATCH v2 7/9] ehci: Add EHCI driver
  • From: Kevin Wolf
• Re: [cdi-devel] [PATCH v2 6/9] cdi/usb: Add headers
  • From: Max Reitz
• Re: [cdi-devel] [PATCH v2 6/9] cdi/usb: Add headers
  • From: Kevin Wolf
• Re: [cdi-devel] [PATCH v2 5/9] cdi.h: Add cdi_handle_bus_device()
  • From: Max Reitz
• Re: [cdi-devel] [PATCH v2 4/9] cdi/scsi: Add support for multiple LUNs
  • From: Max Reitz
• Re: [cdi-devel] [PATCH v2 5/9] cdi.h: Add cdi_handle_bus_device()
  • From: Kevin Wolf
• Re: [cdi-devel] [PATCH v2 4/9] cdi/scsi: Add support for multiple LUNs
  • From: Kevin Wolf
• Re: [cdi-devel] [PATCH v2 4/9] cdi/scsi: Add support for multiple LUNs
  • From: Max Reitz
• Re: [cdi-devel] [PATCH v2 2/9] cdi/misc: Add CDI_UPCAST and endianness functions
  • From: Max Reitz
• Re: [cdi-devel] [PATCH v2 4/9] cdi/scsi: Add support for multiple LUNs
  • From: Kevin Wolf
• Re: [cdi-devel] [PATCH v2 3/9] cdi/scsi, cdi.h: Remove týndur-specific fields
  • From: Kevin Wolf
• Re: [cdi-devel] [PATCH v2 2/9] cdi/misc: Add CDI_UPCAST and endianness functions
  • From: Kevin Wolf
• Re: [cdi-devel] [PATCH v2 1/9] Makefile: Heed Makefile.conf
  • From: Kevin Wolf
• Re: [cdi-devel] [PATCH v2] ahci: Initialisation/Reset improvements
  • From: Kevin Wolf
• [cdi-devel] [PATCH v2 9/9] usb-storage: Add USB mass storage driver
  • From: Max Reitz
• [cdi-devel] [PATCH v2 8/9] usb: Add USB 2.0 bus driver
  • From: Max Reitz
• [cdi-devel] [PATCH v2 7/9] ehci: Add EHCI driver
  • From: Max Reitz
• [cdi-devel] [PATCH v2 6/9] cdi/usb: Add headers
  • From: Max Reitz
• [cdi-devel] [PATCH v2 5/9] cdi.h: Add cdi_handle_bus_device()
  • From: Max Reitz
• [cdi-devel] [PATCH v2 4/9] cdi/scsi: Add support for multiple LUNs
  • From: Max Reitz
• [cdi-devel] [PATCH v2 3/9] cdi/scsi, cdi.h: Remove týndur-specific fields
  • From: Max Reitz
• [cdi-devel] [PATCH v2 2/9] cdi/misc: Add CDI_UPCAST and endianness functions
  • From: Max Reitz
• [cdi-devel] [PATCH v2 0/9] USB support
  • From: Max Reitz
• [cdi-devel] [PATCH v2 1/9] Makefile: Heed Makefile.conf
  • From: Max Reitz
• [cdi-devel] [PATCH v2] ahci: Initialisation/Reset improvements
  • From: Kevin Wolf
• [cdi-devel] [PATCH] ahci: Initialisation/Reset improvements
  • From: Kevin Wolf
• Re: [cdi-devel] [PATCH 0/8] USB support
  • From: Max Reitz
• [cdi-devel] [PATCH] rtl8168b: Add driver
  • From: Max Reitz
• Re: [cdi-devel] [PATCH 8/8] usb-storage: Add USB mass storage driver
  • From: Max Reitz
• Re: [cdi-devel] [PATCH 8/8] usb-storage: Add USB mass storage driver
  • From: Max Reitz
• [cdi-devel] [PATCH 8/8] usb-storage: Add USB mass storage driver
  • From: Max Reitz
• [cdi-devel] [PATCH 7/8] usb: Add USB 2.0 bus driver
  • From: Max Reitz
• [cdi-devel] [PATCH 6/8] ehci: Add EHCI driver
  • From: Max Reitz
• [cdi-devel] [PATCH 5/8] cdi/usb: Add headers
  • From: Max Reitz
• [cdi-devel] [PATCH 4/8] cdi.h: Add cdi_handle_bus_device()
  • From: Max Reitz
• [cdi-devel] [PATCH 3/8] cdi/scsi: Add LUN count to cdi_scsi_device
  • From: Max Reitz
• [cdi-devel] [PATCH 2/8] cdi/scsi, cdi.h: Remove týndur-specific fields
  • From: Max Reitz
• [cdi-devel] [PATCH 1/8] cdi/misc: Add CDI_UPCAST and endianness functions
  • From: Max Reitz
• [cdi-devel] [PATCH 0/8] USB support
  • From: Max Reitz
• Re: [cdi-devel] [PATCH] Memoryleak in ISO9660 driver
  • From: Kevin Wolf
• [cdi-devel] [PATCH] Memoryleak in ISO9660 driver
  • From: Gurgel100
• [cdi-devel] [PATCH 4/4] atapi: Fix CDI_SCSI_WRITE
  • From: Kevin Wolf
• [cdi-devel] [PATCH 2/4] atapi: Support for transferring more than one sector
  • From: Kevin Wolf
• [cdi-devel] [PATCH 0/4] cdi: Schnelleres CD-ROM und Fixes
  • From: Kevin Wolf
• Re: [cdi-devel] [PATCH v2 0/5] AHCI driver
  • From: Kevin Wolf
• [cdi-devel] [PATCH] floppy: Fix step_rate_time for SPECIFY
  • From: Kevin Wolf
• [cdi-devel] [PATCH] iso9660: Fix resource flags
  • From: Kevin Wolf
• [cdi-devel] [PATCH v2 5/5] ahci: Add CD-ROM support
  • From: Kevin Wolf
• [cdi-devel] [PATCH v2 4/5] ahci: Controller and hard disk support
  • From: Kevin Wolf
• [cdi-devel] [PATCH v2 3/5] cdi.h: Add cdi_provide_device_internal_drv()
  • From: Kevin Wolf
• [cdi-devel] [PATCH v2 2/5] cdi.h: Add cdi_driver.initialised
  • From: Kevin Wolf
• [cdi-devel] [PATCH v2 0/5] AHCI driver
  • From: Kevin Wolf
• [cdi-devel] [PATCH v2 1/5] cdi/misc.h: Add CDI_BUILD_BUG_ON() macro
  • From: Kevin Wolf
• [cdi-devel] [PATCH 3/3] ahci: New driver
  • From: Kevin Wolf
• [cdi-devel] [PATCH 2/3] cdi.h: Add cdi_provide_device_internal_drv()
  • From: Kevin Wolf
• [cdi-devel] [PATCH 1/3] cdi/misc.h: Add CDI_BUILD_BUG_ON() macro
  • From: Kevin Wolf
• [cdi-devel] [PATCH 0/3] AHCI driver
  • From: Kevin Wolf
• Re: [cdi-devel] [PATCH] libext2: Don't destroy boot loader
  • From: Kevin Wolf
• [cdi-devel] [PATCH] libext2: Don't destroy boot loader
  • From: Kevin Wolf
• Re: [cdi-devel] [PATCH] floppy: Fix initialisation
  • From: Kevin Wolf
• [cdi-devel] [PATCH] floppy: Fix initialisation
  • From: Kevin Wolf
• Re: [cdi-devel] [PATCH 0/2] Fixes for ata
  • From: Kevin Wolf
• [cdi-devel] [PATCH 2/2] ata: Retry on error
  • From: Kevin Wolf
• [cdi-devel] [PATCH 1/2] ata: Align DMA buffers to 64k
  • From: Kevin Wolf
• [cdi-devel] [PATCH 0/2] Fixes for ata
  • From: Kevin Wolf
• Re: [cdi-devel] [PATCH] e1000: fix RX/TX descriptor alignment.
  • From: Kevin Wolf
• [cdi-devel] [PATCH] e1000: fix RX/TX descriptor alignment.
  • From: Matthew Iselin
• Re: [cdi-devel] [PATCH] e1000: Fix receive buffer size
  • From: Rich Edelman
• [cdi-devel] [PATCH] e1000: Fix receive buffer size
  • From: Kevin Wolf
• Re: [cdi-devel] [PATCH 0/2] CDI.audio
  • From: Kevin Wolf
• Re: [cdi-devel] [PATCH 3/2] hdaudio: Driver for Intel HD Audio
  • From: Max Reitz
• [cdi-devel] [PATCH 3/2] hdaudio: Driver for Intel HD Audio
  • From: Kevin Wolf
• Re: [cdi-devel] [PATCH 2/2] CDI.audio: AC97
  • From: Kevin Wolf
• Re: [cdi-devel] [PATCH 1/2] CDI.audio
  • From: Kevin Wolf
• [cdi-devel] [PATCH 2/2] CDI.audio: AC97
  • From: max
• [cdi-devel] [PATCH 1/2] CDI.audio
  • From: max
• [cdi-devel] [PATCH 0/2] CDI.audio
  • From: max
• Re: [cdi-devel] [PATCH] ata: Fix bus master direction flag
  • From: Kevin Wolf
• [cdi-devel] [PATCH] ata: Fix bus master direction flag
  • From: Kevin Wolf
• Re: [cdi-devel] [PATCH] CDI.audio
  • From: Kevin Wolf
• [cdi-devel] [RFC] CDI.audio: ac97
  • From: max
• Re: [cdi-devel] [PATCH] CDI.audio
  • From: Max Reitz
• Re: [cdi-devel] [PATCH] CDI.audio
  • From: Kevin Wolf
• Re: [cdi-devel] [PATCH] CDI.audio
  • From: Max Reitz
• Re: [cdi-devel] [PATCH] CDI.audio
  • From: Matthew Iselin
• Re: [cdi-devel] [PATCH] CDI.audio
  • From: Max Reitz
• Re: [cdi-devel] [PATCH] CDI.audio
  • From: Kevin Wolf
• Re: [cdi-devel] [PATCH] CDI.audio
  • From: Max Reitz
• Re: [cdi-devel] [PATCH] CDI.audio
  • From: Kevin Wolf
• Re: [cdi-devel] [PATCH] CDI.audio
  • From: Max Reitz
• Re: [cdi-devel] [PATCH] CDI.audio
  • From: Matthew Iselin
• Re: [cdi-devel] [PATCH] CDI.audio
  • From: Kevin Wolf
• Re: [cdi-devel] [PATCH] cdi/cmos.h
  • From: Kevin Wolf
• [cdi-devel] [PATCH] CDI.audio
  • From: max
• [cdi-devel] [PATCH] cdi/cmos.h
  • From: max
• [cdi-devel] [RFC][PATCH v2] fat: Beginnings of a FAT file system driver
  • From: Kevin Wolf
• Re: [cdi-devel] [PATCH] doc: Add text to doxygen main page
  • From: Rich Edelman
• [cdi-devel] [PATCH] doc: Add text to doxygen main page
  • From: Kevin Wolf
• Re: [cdi-devel] [PATCH] Improve documentation for cdi/storage
  • From: Matthew Iselin
• Re: [cdi-devel] [PATCH] e1000: Add 8086:1004 PCI ID
  • From: Matthew Iselin
• [cdi-devel] [PATCH] e1000: Add 8086:1004 PCI ID
  • From: Kevin Wolf
• [cdi-devel] [PATCH] Improve documentation for cdi/storage
  • From: Kevin Wolf
• Re: [cdi-devel] [PATCH v2] Make e1000 work in VirtualBox
  • From: Kevin Wolf
• [cdi-devel] [PATCH v2] Make e1000 work in VirtualBox
  • From: Matthew Iselin
• Re: [cdi-devel] [PATCH] Make e1000 work in VirtualBox
  • From: Kevin Wolf
• Re: [cdi-devel] [PATCH] Make e1000 work in VirtualBox
  • From: Matthew Iselin
• Re: [cdi-devel] [RFC][PATCH] fat: Beginnings of a FAT file system driver
  • From: matthew@xxxxxxxxxxxxxx
• [cdi-devel] [RFC][PATCH] fat: Beginnings of a FAT file system driver
  • From: Kevin Wolf
• Re: [cdi-devel] [PATCH] pci.h: Improve documentation
  • From: Max Reitz
• Re: [cdi-devel] [PATCH] Header cleanups
  • From: Max Reitz
• [cdi-devel] [PATCH] pci.h: Improve documentation
  • From: Kevin Wolf
• [cdi-devel] [PATCH] Header cleanups
  • From: Kevin Wolf
• Re: [cdi-devel] [PATCH] doc.h: English translation
  • From: Rich Edelman
• Re: [cdi-devel] [PATCH] doc.h: English translation
  • From: Kevin Wolf
• [cdi-devel] [PATCH v2] CDI.usb
  • From: max
• [cdi-devel] [PATCH] CDI.usb
  • From: max
• [cdi-devel] [PATCH] doc.h: English translation
  • From: Kevin Wolf
• [cdi-devel] [RFC] Getting the physical address of a virtual buffer
  • From: Max Reitz
• [cdi-devel] [PATCH] Make e1000 work in VirtualBox
  • From: Matthew Iselin
• Re: [cdi-devel] [PATCH v2] Add cdi_provide_device prototype to cdi.h
  • From: Kevin Wolf
• Re: [cdi-devel] [PATCH v2] Add cdi_provide_device prototype to cdi.h
  • From: Max Reitz
• Re: [cdi-devel] [PATCH v2] Add cdi_provide_device prototype to cdi.h
  • From: Rich Edelman
• [cdi-devel] [PATCH v2] Add cdi_provide_device prototype to cdi.h
  • From: Matthew Iselin
• [cdi-devel] [PATCH] Add cdi_provide_device prototype to cdi.h
  • From: Matthew Iselin
• Re: [cdi-devel] [PATCH 0/4] mem.h - Part 1
  • From: Kevin Wolf
• Re: [cdi-devel] [PATCH] Change CDI headers to use angle brackets for other CDI headers
  • From: Kevin Wolf
• Re: [cdi-devel] [PATCH 4/4] cdi: Remove obsolete functions
  • From: Rich Edelman
• Re: [cdi-devel] [PATCH 3/4] cdi: Replace cdi_alloc_phys_mem/addr
  • From: Rich Edelman
• Re: [cdi-devel] [PATCH 2/4] pcnet: Factor init block function out
  • From: Rich Edelman
• Re: [cdi-devel] [PATCH 1/4] mem.h: Handling memory areas
  • From: Rich Edelman
• Re: [cdi-devel] [PATCH] Change CDI headers to use angle brackets for other CDI headers
  • From: Rich Edelman
• Re: [cdi-devel] [PATCH 4/4] cdi: Remove obsolete functions
  • From: Max Reitz
• Re: [cdi-devel] [PATCH 3/4] cdi: Replace cdi_alloc_phys_mem/addr
  • From: Max Reitz
• Re: [cdi-devel] [PATCH 2/4] pcnet: Factor init block function out
  • From: Max Reitz
• Re: [cdi-devel] [PATCH 1/4] mem.h: Handling memory areas
  • From: Max Reitz
• Re: [cdi-devel] [PATCH] Change CDI headers to use angle brackets for other CDI headers
  • From: Max Reitz
• Re: [cdi-devel] [PATCH] Change cdi.h to use angle brackets for cdi-osdep.h include
  • From: Matthew Iselin
• [cdi-devel] [PATCH] Change CDI headers to use angle brackets for other CDI headers
  • From: Matthew Iselin
• Re: [cdi-devel] [PATCH 4/4] cdi: Remove obsolete functions
  • From: Matthew Iselin
• Re: [cdi-devel] [PATCH 3/4] cdi: Replace cdi_alloc_phys_mem/addr
  • From: Matthew Iselin
• Re: [cdi-devel] [PATCH 1/4] mem.h: Handling memory areas
  • From: Matthew Iselin
• Re: [cdi-devel] [PATCH 2/4] pcnet: Factor init block function out
  • From: Matthew Iselin
• [cdi-devel] [PATCH] Change cdi.h to use angle brackets for cdi-osdep.h include
  • From: Matthew Iselin
• [cdi-devel] [PATCH 4/4] cdi: Remove obsolete functions
  • From: Kevin Wolf
• [cdi-devel] [PATCH 3/4] cdi: Replace cdi_alloc_phys_mem/addr
  • From: Kevin Wolf
• [cdi-devel] [PATCH 2/4] pcnet: Factor init block function out
  • From: Kevin Wolf
• [cdi-devel] [PATCH 1/4] mem.h: Handling memory areas
  • From: Kevin Wolf
• [cdi-devel] [PATCH 0/4] mem.h - Part 1
  • From: Kevin Wolf
• Re: [cdi-devel] [PATCH v2] mem.h: Handling memory areas
  • From: Matthew Iselin
• [cdi-devel] [PATCH v2] mem.h: Handling memory areas
  • From: Kevin Wolf
• Re: [cdi-devel] CDI status
  • From: Kevin Wolf
• Re: [cdi-devel] CDI status
  • From: Matthew Iselin
• Re: [cdi-devel] CDI status
  • From: Alexander Siol
• Re: [cdi-devel] CDI status
  • From: Matthew Iselin
• Re: [cdi-devel] CDI status
  • From: Kevin Wolf
• [cdi-devel] CDI status
  • From: Kevin Wolf
• Re: [cdi-devel] [RFC PATCH] mem.h: Handling memory areas [edit: documentation]
  • From: Matthew Iselin
• Re: [cdi-devel] [RFC PATCH] mem.h: Handling memory areas
  • From: Matthew Iselin
• Re: [cdi-devel] [RFC PATCH] mem.h: Handling memory areas
  • From: Kevin Wolf
• Re: [cdi-devel] [RFC PATCH] mem.h: Handling memory areas
  • From: Matthew Iselin
• Re: [cdi-devel] [RFC PATCH] mem.h: Handling memory areas
  • From: Kevin Wolf
• Re: [cdi-devel] [RFC PATCH] mem.h: Handling memory areas
  • From: Matthew Iselin
• [cdi-devel] [RFC PATCH] mem.h: Handling memory areas
  • From: Kevin Wolf
• Re: [cdi-devel] [PATCH] Documentation: Add general interface description (German)
  • From: Max Reitz
• Re: [cdi-devel] [PATCH] Documentation: Add general interface description (German)
  • From: Antoine Kaufmann
• Re: [cdi-devel] [PATCH] Documentation: Add general interface description (German)
  • From: Kevin Wolf
• Re: [cdi-devel] [PATCH] Documentation: Add general interface description (German)
  • From: Max Reitz
• Re: [cdi-devel] [PATCH] misc.h: Improved documentation of cdi_wait_irq
  • From: Max Reitz
• [cdi-devel] [PATCH] Documentation: Add general interface description (German)
  • From: Kevin Wolf
• [cdi-devel] [PATCH] misc.h: Improved documentation of cdi_wait_irq
  • From: Kevin Wolf
• Re: [cdi-devel] [PATCH] ata: Remove partition handling
  • From: Rich Edelman
• Re: [cdi-devel] [PATCH] ata: Remove partition handling
  • From: Max Reitz
• [cdi-devel] [PATCH] ata: Remove partition handling
  • From: Kevin Wolf
• Re: [cdi-devel] Interrupts
  • From: Matthew Iselin
• Re: [cdi-devel] Interrupts
  • From: Kevin Wolf
• Re: [cdi-devel] Interrupts
  • From: Matthew Iselin
• Re: [cdi-devel] Interrupts
  • From: Max Reitz
• [cdi-devel] Interrupts
  • From: Kevin Wolf
• Re: [cdi-devel] [PATCH] Add English translations to cdi/lists.h
  • From: Kevin Wolf
• [cdi-devel] [PATCH] Add English translations to cdi/lists.h
  • From: Rich Edelman
• [cdi-devel] [PATCH 5/5] USB MSD
  • From: Kevin Wolf
• [cdi-devel] [PATCH 4/5] USB 1.1
  • From: Kevin Wolf
• [cdi-devel] [PATCH 3/5] UHCI
  • From: Kevin Wolf
• [cdi-devel] [PATCH 2/5] OHCI
  • From: Kevin Wolf
• [cdi-devel] [PATCH 1/5] CDI.usb, CDI.usb-hcd
  • From: Kevin Wolf
• [cdi-devel] [PATCH 0/5] Forward ported USB patches
  • From: Kevin Wolf
• Re: [cdi-devel] Proposed Dynamic Driver Loading System
  • From: Max Reitz
• Re: [cdi-devel] Proposed Dynamic Driver Loading System
  • From: Kevin Wolf
• Re: [cdi-devel] Proposed Dynamic Driver Loading System
  • From: Matthew Iselin
• Re: [cdi-devel] Proposed Dynamic Driver Loading System
  • From: Kevin Wolf
• Re: [cdi-devel] Proposed Dynamic Driver Loading System
  • From: Matthew Iselin
• Re: [cdi-devel] Proposed Dynamic Driver Loading System
  • From: Kevin Wolf
• Re: [cdi-devel] Proposed Dynamic Driver Loading System
  • From: Matthew Iselin
• Re: [cdi-devel] Proposed Dynamic Driver Loading System
  • From: Rich Edelman
• Re: [cdi-devel] Proposed Dynamic Driver Loading System
  • From: Max Reitz
• Re: [cdi-devel] Proposed Dynamic Driver Loading System
  • From: Kevin Wolf
• [cdi-devel] Proposed Dynamic Driver Loading System
  • From: Matthew Iselin
• [cdi-devel] Proposed Dynamic Driver Loading System
  • From: Matthew Iselin
• [cdi-devel] Proposed Dynamic Driver Loading System
  • From: Matthew Iselin
• Re: [cdi-devel] [PATCH] Documentation: Document and translate cdi.h
  • From: Max Reitz
• Re: [cdi-devel] [PATCH] Documentation: Document and translate cdi.h
  • From: Rich Edelman
• Re: [cdi-devel] [PATCH] Documentation: Document and translate cdi.h
  • From: Matthew Iselin
• [cdi-devel] [PATCH] Documentation: Document and translate cdi.h
  • From: Kevin Wolf
• Re: [cdi-devel] [PATCH 0/3] Rework device creation mechanism
  • From: Kevin Wolf
• Re: [cdi-devel] [PATCH 0/3] Rework device creation mechanism
  • From: Rich Edelman
• Re: [cdi-devel] [PATCH 0/3] Rework device creation mechanism
  • From: Max Reitz
• Re: [cdi-devel] [PATCH 0/3] Rework device creation mechanism
  • From: Kevin Wolf
• Re: [cdi-devel] [PATCH 0/3] Rework device creation mechanism
  • From: Max Reitz
• [cdi-devel] [PATCH] cdi.h: Remove cdi_run_drivers from the interface
  • From: Kevin Wolf
• Re: [cdi-devel] [PATCH 0/3] Rework device creation mechanism
  • From: Kevin Wolf
• [cdi-devel] [PATCH] cdi: Move send_packet into cdi_net_driver
  • From: Kevin Wolf
• Re: [cdi-devel] [PATCH 0/3] Rework device creation mechanism
  • From: Matthew Iselin
• Re: [cdi-devel] [PATCH 1/3] cdi.h: Introduce cdi_bus_data
  • From: Max Reitz
• Re: [cdi-devel] [PATCH 0/3] Rework device creation mechanism
  • From: Max Reitz
• [cdi-devel] [PATCH 3/3] Initialise PCI devices in the CDI library
  • From: Kevin Wolf
• [cdi-devel] [PATCH 2/3] Move complete initialisation to device_init
  • From: Kevin Wolf
• [cdi-devel] [PATCH 1/3] cdi.h: Introduce cdi_bus_data
  • From: Kevin Wolf
• [cdi-devel] [PATCH 0/3] Rework device creation mechanism
  • From: Kevin Wolf
• [cdi-devel] [PATCH] cdi.h: Remove cdi_device.type
  • From: Kevin Wolf
• Re: [cdi-devel] [PATCH v3 1/5] CDI.usb, CDI.usb-hcd
  • From: Kevin Wolf
• [cdi-devel] [PATCH v3 5/5] USB MSD
  • From: Kevin Wolf
• [cdi-devel] [PATCH v3 4/5] USB 1.1
  • From: Kevin Wolf
• [cdi-devel] [PATCH v3 3/5] UHCI
  • From: Kevin Wolf
• [cdi-devel] [PATCH v3 2/5] OHCI
  • From: Kevin Wolf
• [cdi-devel] [PATCH v3 1/5] CDI.usb, CDI.usb-hcd
  • From: Kevin Wolf
• [cdi-devel] [PATCH v3 0/5] USB support
  • From: Kevin Wolf
• Re: [cdi-devel] [PATCH 1/6] Mempool
  • From: Kevin Wolf
• Re: [cdi-devel] [PATCH v2] Direct access to PCI configuration space
  • From: Kevin Wolf
• Re: [cdi-devel] [PATCH v2] Direct access to PCI configuration space
  • From: Kevin Wolf
• [cdi-devel] [PATCH v2] Direct access to PCI configuration space
  • From: max
• Re: [cdi-devel] [PATCH] Direct access to PCI configuration space
  • From: Kevin Wolf
• Re: [cdi-devel] [PATCH] Fix a signed/unsigned comparison warning in e1000
  • From: Kevin Wolf
• [cdi-devel] [PATCH] Fix a signed/unsigned comparison warning in e1000
  • From: Matthew Iselin
• Re: [cdi-devel] [PATCH] Makefile
  • From: Kevin Wolf
• [cdi-devel] [PATCH 6/6] USB MSD
  • From: max
• [cdi-devel] [PATCH 5/6] USB 1.1
  • From: max
• [cdi-devel] [PATCH 4/6] UHCI
  • From: max
• [cdi-devel] [PATCH 3/6] OHCI
  • From: max
• [cdi-devel] [PATCH 2/6] CDI.usb, CDI.usb-hcd
  • From: max
• [cdi-devel] [PATCH 1/6] Mempool
  • From: max
• [cdi-devel] [PATCH] Direct access to PCI configuration space
  • From: max
• [cdi-devel] [PATCH] Makefile
  • From: max
• Re: [cdi-devel] [PATCH] USB 1.1
  • From: Kevin Wolf
• Re: [cdi-devel] [PATCH] Remove dependency on cdi-osdep.h in cdi.h
  • From: Matthew Iselin
• Re: [cdi-devel] [PATCH] Remove dependency on cdi-osdep.h in cdi.h
  • From: Matthew Iselin
• Re: [cdi-devel] [PATCH] Remove dependency on cdi-osdep.h in cdi.h
  • From: Max Reitz
• Re: [cdi-devel] [PATCH] Remove dependency on cdi-osdep.h in cdi.h
  • From: Kevin Wolf
• Re: [cdi-devel] [PATCH] Add extern "C" to header files.
  • From: Kevin Wolf
• [cdi-devel] [PATCH] English comments for usb.h and usb-hcd.h
  • From: max
• Re: [cdi-devel] [PATCH] Update cdi-osdep.h to contain OS-specific structs for PCI and DMA
  • From: Kevin Wolf
• Re: [cdi-devel] [PATCH] CDI.usb, mempool
  • From: Kevin Wolf
• [cdi-devel] [PATCH] Memleak in USB 1.1
  • From: max
• Re: [cdi-devel] [PATCH] USB 1.1
  • From: Matthew Iselin
• Re: [cdi-devel] [PATCH] CDI.usb, mempool
  • From: Matthew Iselin
• [cdi-devel] [PATCH] Remove dependency on cdi-osdep.h in cdi.h
  • From: Matthew Iselin
• [cdi-devel] [PATCH] Add extern "C" to header files.
  • From: Matthew Iselin
• [cdi-devel] [PATCH] Update cdi-osdep.h to contain OS-specific structs for PCI and DMA
  • From: Matthew Iselin
• [cdi-devel] [PATCH v2] Various cleanups and portability fixes
  • From: Matthew Iselin
• [cdi-devel] [PATCH] USB mass storage device driver
  • From: max
• [cdi-devel] [PATCH] OHCI
  • From: max
• [cdi-devel] [PATCH] UHCI
  • From: max
• [cdi-devel] [PATCH] USB 1.1
  • From: max
• [cdi-devel] [PATCH] CDI.usb, mempool
  • From: max
• [cdi-devel] [PATCH] Various cleanups and portability fixes
  • From: Matthew Iselin
• [cdi-devel] [PATCH v2] CDI.usb, CDI.usb-hcd
  • From: max
• [cdi-devel] [PATCH] CDI.usb, CDI.usb-hcd
  • From: max
• [cdi-devel] [PATCH 4/4] Simplify driver declarations
  • From: Kevin Wolf
• [cdi-devel] [PATCH 3/4] Call driver init function as a callback
  • From: Kevin Wolf
• [cdi-devel] [PATCH 2/4] Use the CDI_DRIVER macro
  • From: Kevin Wolf
• [cdi-devel] [PATCH 1/4] New header cdi-osdep.h
  • From: Kevin Wolf
• [cdi-devel] [PATCH 0/4] Restructure driver initialization
  • From: Kevin Wolf
• Re: [cdi-devel] Proposed Sound Infrastructure
  • From: Matthew Iselin
• Re: [cdi-devel] Proposed Sound Infrastructure
  • From: Kevin Wolf
• Re: [cdi-devel] Proposed Sound Infrastructure
  • From: Matthew Iselin
• Re: [cdi-devel] Proposed Sound Infrastructure
  • From: Kevin Wolf
• Re: [cdi-devel] [PATCH] Oncoming CDI drivers' numbers
  • From: Max Reitz
• [cdi-devel] [PATCH] Oncoming CDI drivers' numbers
  • From: max
• [cdi-devel] Proposed Sound Infrastructure
  • From: Matthew Iselin
• Re: [cdi-devel] [PATCH v2] Fix warnings in e1000, sis900, pcnet
  • From: Kevin Wolf
• [cdi-devel] [PATCH v2] Fix warnings in e1000, sis900, pcnet
  • From: Matthew Iselin
• [cdi-devel] [PATCH] Fix warnings in e1000, pcnet, sis900
  • From: Matthew Iselin
• [cdi-devel] [PATCH] Update pcnet to use cdi_wait_irq
  • From: Matthew Iselin
• Re: [cdi-devel] [PATCH] CDI.audio - without "#define TYNDUR"
  • From: Matthew Iselin
• Re: [cdi-devel] [PATCH] CDI.audio - without "#define TYNDUR"
  • From: Kevin Wolf
• [cdi-devel] [PATCH] CDI.audio - without "#define TYNDUR"
  • From: max
• [cdi-devel] [PATCH] CDI.audio
  • From: max
• [cdi-devel] [PATCH] ac97: CDI.storage driver
  • From: max
• [cdi-devel] [PATCH] ac97: CDI.storage driver
  • From: max
• [cdi-devel] Multilinguales Hello World [1]
  • From: Kevin Wolf
• [cdi-devel] [PATCH] Mehrere ISRs pro IRQ
  • From: max
• [cdi-devel] [PATCH] usb: A bit faster
  • From: max
• [cdi-devel] [PATCH] Multiple packets
  • From: max
• Re: [cdi-devel] [PATCH] usb: Handle multiple packets in usb_do_packet
  • From: Max Reitz
• [cdi-devel] [PATCH] usb: Handle multiple packets in usb_do_packet
  • From: Kevin Wolf
• [cdi-devel] [PATCH] usb: OHCI driver
  • From: max
• [cdi-devel] [PATCH] Introduced pipes, less parameters, OHCI beginning
  • From: max
• [cdi-devel] [PATCH] usb: Quarter of memory
  • From: max
• [cdi-devel] [PATCH 2/2] [usb] No memory error, remove STALL
  • From: max
• [cdi-devel] [PATCH] Double reset on enum, no toggle change on error
  • From: max
• [cdi-devel] [PATCH] Correct DATA0/DATA1 treatment and packet size
  • From: max
• [cdi-devel] [PATCH] No STALL
  • From: max
• [cdi-devel] [PATCH] No STALL
  • From: max
• [cdi-devel] [PATCH] usb: uhci_do_packet interface rework
  • From: Kevin Wolf
• [cdi-devel] [PATCH] Reformatting of the reformatting
  • From: Max Reitz
• Re: [cdi-devel] [PATCH] "Better" indent, wait for ACK instead of sleep
  • From: Kevin Wolf
• [cdi-devel] [PATCH] "Better" indent, wait for ACK instead of sleep
  • From: max
• Re: [cdi-devel] [PATCH 2/2] cdi: Fix compilation on Linux
  • From: Antoine Kaufmann
• Re: [cdi-devel] [PATCH 1/2] cdi: Add Makefile
  • From: Antoine Kaufmann
• Re: [cdi-devel] [PATCH] usb: struct usb_packet
  • From: Max Reitz
• [cdi-devel] [PATCH] usb: struct usb_packet
  • From: Kevin Wolf
• [cdi-devel] [PATCH 2/2] cdi: Fix compilation on Linux
  • From: Kevin Wolf
• [cdi-devel] [PATCH 1/2] cdi: Add Makefile
  • From: Kevin Wolf
• [cdi-devel] [PATCH 0/2] Compiling CDI on Linux
  • From: Kevin Wolf
• [cdi-devel] [PATCH] UHCI, USB, MSC
  • From: Max Reitz
• [cdi-devel] [PATCH] UHCI, USB, MSC
  • From: Max Reitz
• [Cdi-devel] [PATCH] UHCI, USB, MSC
  • From: Max Reitz